Software to configure ehome infrared receiver

#SOFTWARE TO CONFIGURE EHOME INFRARED RECEIVER INSTALL#

Press one button on your remote as fast as possible but DO NOT hold it down. Enter a name, press enter, hold down the button you are learning and repeat. Just hold down any button on your remote until the next prompt. You'll get a wall of text and are asked to press enter. :/etc/lirc# irrecord -driver=irman -device=/dev/ttyS0 MyRemote # use the driver that you chose in the previous part. :~$ sudo -s # you have to be root for this part Fire up irrecord with the following command: Delete the lines between begin codes and end codes. If you can find you remote, copy the config file to /etc/lirc/nf and open the file with a text editor. Ubuntu stores the configuration files in ' /usr/share/lirc/remotes but you can also find them in the source tree in the remotes directory. First, check if your IR receiver is already preconfigured. You have downloaded and installed Lirc and are now ready to set it up. :~/lirc-0.9.4b$ make & sudo make installДў Configure Lirc to understand your remote's commands configure -help for supported ones - for homebrew serial IR use -driver=serial) configure -with-x -with-driver=irman (or whatever remote you are using, check.

:~/lirc-0.9.4b$ aclocal & autoheader & autoconf If you don't have a lirc package in you distribution or (in my case) a buggy version, it's pretty easy to compile lirc from source:

#SOFTWARE TO CONFIGURE EHOME INFRARED RECEIVER INSTALL#

If you're using Ubuntu or Debian you can just type apt-get install lirc.

3 Configure Kodi to understand Lirc's commandsДЇirst you have to download and install Lirc.

2 Configure Lirc to understand your remote's commands.

Software to configure ehome infrared receiver